Spooky Babe web DTF transfer

Spooky Babe web DTF transfer

DTF (Direct-to-Film) transfers are full-color prints to be used on light or dark garments. A heat press machine is needed to transfer the designs. Just place, press, peel and it is good to go. 

DTF can be applied on light or dark garments such as cotton, cotton/poly blends, nylon, treated leather, and 100% polyester.

DTF Transfer Application Instructions

  • Preheat heat press to 325 – 335.
  • Press the garment for 3 seconds to remove excess moisture and any wrinkles. Let the garment cool down for about 5 seconds before adding the transfer.
  • Place the transfer on the garment image facing up.
  • Press at 325F for 15 seconds under medium – heavy pressure. Use a Teflon sheet. 
  • Wait 4-6 seconds before peeling gently. Start peeling from a corner up. If the image does not come off completely, repress with the image in place.
  • After peeling, cover the image with a Teflon sheet or parchment paper and press again for 10 seconds.
  • We recommend waiting 24 hours before washing the garment. Wash inside out.

Care Instructions:

  • Turn the garment inside out.
  • Machine wash cold.
  • No bleach.
  • No softener.
  • Do not dry clean or iron.
  • Tumble dry low.

Disclaimer: 

  • Transfer sizes are approximate.
  • Colors of transfers may vary from transfer to transfer.

Heat press machines are different, please run a test first.

ALL SALES ARE FINAL.

 

 

 

$7.00